MiningOS Flasher Install Documentation

1. Burning master images

Download Etcher, open https://www.balena.io/etcher/, and download the corresponding installation package according to your computer system.

After installing Etcher, select the downloaded image (miningos-flasher.img), choose your USB flash drive (16G or above in size), and finally click Flash! Wait patiently for the burning to finish.

Once the burning is complete unzip the MiningOs image you need to install and copy it to the root directory of your master disk.

Edit the text file and enter your activation code, coins, pool address, wallet, and HostName.

2. Boot Master Disk Image

Use USB Flash Drive to boot your system（Your system supports both UEFI Boot Mode and Legacy BIOS Boot Mode.）

Input: miningos-flasher

eg:[root@archlinux ~]# miningos-flasher

Then will show：

Image Found: /mnt/miningos-install/MININGOS-0.7.2.20220901-x86_64-NVIDIA-RC.img.

Below are qualified disks:

[1]: sda MSATA

Select your usb device, await some time, if you see “Applying Configuation”, is successful.

Confirm to flash on Disk MSATA? Esc to skip, or wait 5 seconds to continueCopy image to Disk /dev/sda, This may take some time, please wait.

12419072 bytes (12 MB, 12 MiB) copied, 169 s, 73.3 kB/s

0+1 records in

0+1 records out

12419072 bytes (12 MB, 12 MiB) copied, 180.704 s, 68.7 kB/s

Applying Configuration.

[root@archlinux ~]#